$50 Off a Service Call

Geothermal Heating and Cooling in San Jose, California

Geothermal System

Geothermal heating and cooling in San Jose, California, is an energy-saving option for your home.

Identical to heat pumps, a geothermal system transports warmth from one area to another. It makes use of an in-ground loop system to move warmth from the ground to your home.

This geothermal system harnesses the earth’s reserved power, which can translate into significant savings on your heating and cooling bills.

When compared to conventional furnaces, the EPA says owners operating geothermal heat pumps can save 70% on heating bills and up to 50% on cooling your house each year. This suggests you might save between $400 to $1,500 yearly, which could help your geothermal system cover the expense in just a few years.

A current geothermal system may also enable you to become qualified for energy paybacks.

Give our professionals a phone call at 408-215-1018 and we’ll help you design the best geothermal heating and cooling system for your house.

CALL TODAY 408-215-1018

8 Benefits of Using Geothermal Energy

Geothermal heating and cooling units are quite cost effective and could possibly last twice as long as conventional furnaces and air conditioners. Here’s additional advantages to installing one of these geothermal heating and cooling systems at your home:

savings icon

1. Energy Savings

Most units are at least three times more effective than fossil fuel systems. The the federal government has determined geothermal has the potential to save you up to $1,500 every 12 months. This investment may help the geothermal heating and cooling system pay for itself in only a few years.

life span icon

2. Extended Time of Usage

Geothermal systems generally last longer than conventional units, mainly since they are located underground. You can look forward to your geothermal heating and cooling equipment to go on working for 20–25 years. Gas furnaces and electric heat pumps usually want to be changed out after 15 years.

free hot water icon

3. Free Hot Water

Geothermal generates free hot water. It can lessen your power use of hot water up to 60%. Your actual savings will depend on the total number of occupants and what quantity of hot water your family uses.

Not only does the geothermal heating and cooling system create hot water, in many cases it makes “more than free” hot water. This means the unit in practical terms becomes more effective when generating hot water.

heating and cooling icon

4. Joined Heating and Cooling System

A system can heat and cool your residence. You won’t need a cooling unit outside or independent furnace inside, unless you live in a cold area. A split heating system is possible for parts of the country where weather conditions commonly fall to a bitterly cold level.

humidity control icon

5. Better Dampness Management

Geothermal sustains around 50-50 relative inside humidity, causing it to be extremely productive in humid rooms.

safe icon

6. Better Safety

Since geothermal doesn’t rely on combustion to supply warmth, you don’t need to worry about gas leaks or carbon monoxide.

low maintenance icon

7. Little Servicing

There is a smaller amount of servicing needed with a geothermal system since there is no outdoors unit. This makes it less at risk for failure throughout scorching summers. Since it doesn’t depend on external temperatures, no defrost controls are necessary as found on a conventional heat pump.

quiet icon

8. Silent Function

Geothermal is no different than anything else you purchase in life. Spending a small amount at this time generally indicates you receive less in return. Well-constructed and appropriately installed geothermal equipment will give you a lifetime of peaceful operation.

Types of Geothermal Systems

Open and closed geothermal loop systems

There are two fundamental kinds of geothermal equipment: open loop and closed loop.

Because these loops are deep under the surface, first installation will affect your lawn. However, the loops won’t be visible once the grass has returned.

Open Loop Geothermal

Open loop geothermal uses groundwater to move heat. It can be designed to operate with a well, pond or lake.

This system is typically the most energy saving because of consistent groundwater conditions. Sometimes, it’s not always feasible due to a scarcity of groundwater or too much iron in the groundwater. Local rules may also not allow these geothermal systems in your town.

Closed Loop Geothermal

Closed loop geothermal utilizes a continuous loop to transfer water (or antifreeze solution for frigid areas) to the ground and back to the geothermal heating and cooling equipment. The water is resent in a pressurized pipe instead of incorporating new water.

There are some placement options, including horizontal, slinky and vertical.

Reach Out to the Geothermal Pros at American HVAC Inc

A geothermal system is a strong investment in your home. But choosing the right equipment and right company to add the equipment to your home can feel like a complicated ordeal. At American HVAC Inc, we find it to be simple with expert help from our heating and cooling pros.

Call us at 408-215-1018 or contact us by email to begin the process immediately.

CALL TODAY 408-215-1018